concrete repair

PUMPABLE SHRINKAGE COMPENSATED CEMENTITIOUS GROUT

Description SikaGrout 215 is a pumpable dual-shrinkage compensated, self-levelling, prebagged cementitious grout with extended working time to suit local ambient temperatures.

LOW VISCOSITY AND SEMI ELASTIC EPOXY RESIN


Description A solvent-free, 2-component low viscosity and semi elastic liquid, based on epoxy resins. Especially for sealing into non-structural cracks and cavities in concrete.

STRUCTURAL REPAIR MORTAR FOR HAND PLACED / WET SPRAY REPAIR MORTAR


Description
Sika MonoTop 412 MY is a single component, fibre reinforced, low shrinkage structural repair mortar. Fast repairs to overhead, horizontal or vertical concrete or mortar surfaces above and below ground level.

READY- TO-USE ACRYLIC SKIM COAT


Description SikaWall 603 Acrylic is a skim smoothing rendering paste that is used for levelling uneven surfaces and repairing surface defects in concrete, plasters and drywalls. A smooth surface is obtained by eliminating blemishes such as grooves, seams, fine cracks and blowholes.

HIGH PERFORMANCE, CEMENTITIOUS FLOOR SCREED


Description Sikafloor®-137 Screed is a durable, high quality cementitious premixed floor screed specially formulated for casting onto both old and new concrete floor.

LOW VISCOSITY INJECTION RESINS


Description Sikadur-52 MY is a two part, solvent free, low viscosity injection-liquids, based on high strength epoxy resins.

HIGH EARLY STRENGTH POURABLE REPAIR MORTAR


Description Sika® Patch M MY is a pourable 1-part cementitious mortar for repair situations where high early strength is required.

Uses Fast repair mortar for level and slightly inclined concrete and mortar substrates where a rapid return to service is required.

HIGH STRENGTH SHRINKAGE COMPENSATED CEMENTITIOUS GROUT


Description SikaGrout 220 is a high strength, non-shrink, self-levelling, prebagged cementitious grouting mortar with extended working time to suit local ambient temperatures.

MULTI-PURPOSE DUAL SHRINKAGE COMPENSATED CEMENTITIOUS GROUT


Description Formerly known as SikaGrout 214. SikaGrout 214 MY is a dual-shrinkage compensated self-levelling, premixed cementitious grout with extended working time to suit local ambient temperatures.

PUMPABLE NON-SHRINK CEMENTITIOUS GROUT


Description SikaGrout® P is a pumpable shrinkage-compensated self-levelling, cementitious grouting mortar.

HIGH PERFORMANCE, ONE PART, CEMENTITIOUS POLYMER MODIFIED FINISH SKIMCOAT


Description Sika MonoTop 711 MY is a high performance, one part, cementitious polymer modified based filling and levelling plasters for concrete surfaces. Sika MonoTop 711 MY consists of finely crushed high quality limestone.

PORE SEALER / FAIRING COAT


Description Sika MonoTop 620 MY is a one-part cementitious polymer-modified mortar containing silica fume. It is used as a superior finishing and protective top coat for concrete and concrete repair patches.
Uses

• As a pore sealer/finishing coat to concrete, mortar patches and screeds.

HIGH BUILD POLYMER MODIFIED CEMENTITIOUS PATCH REPAIR MORTAR


Description Sika MonoTop®-615 SD is a one-part, thixotropic, high build, polymer modified, cementitious mortar containing silica fume. Sika MonoTop®-615 SD cures to produce a medium strength mortar with enhanced polymeric properties.

BONDING MORTAR AND REINFORCEMENT PROTECTION


Description Sika MonoTop®-610 MY is a one-part, cementitious, polymer modified mortar containing silica fume and corrosion inhibitors.

POLYMER MODIFIED CEMENTITIOUS PATCH REPAIR MORTAR


Description Sika MonoTop® R-40 is a one part, thixotropic, polymer modified, cementitious mortar containing silica fume. It cures to produce a high strength mortar with enhanced polymeric properties.

POLYMER MODIFIED CEMENTITIOUS HAND PLACED / WET SPRAY REPAIR MORTAR


Description Sika MonoTop® R is a one part, thixotropic, polymer modified, cementitious mortar containing silica fume, cures to produce a high strength mortar with enhanced polymeric properties.

DUAL SHRINKAGE-COMPENSATED, FLOWING, CEMENTITIOUS REPAIR MATERIAL FOR FORMWORK REPAIRS

Description Sika® Microcrete-2000 is a dual shrinkage-compensated pre-bagged flowing micro concrete. It has very good flow properties and has been specifically developed to reduce heat generation.

SELF-COMPACTING CONCRETE FOR FORMWORK REPAIRS


Description Sika® Microcrete®-218 is a pre-bagged self-compacting concrete. It has very good flow properties and has been specifically developed to reduce heat generation. As such, large volume repairs may be performed without addition of aggregates.

SELF-COMPACTING CONCRETE FOR FORMWORK REPAIRS


Description Sika® Microcrete®-217 is a pre-bagged self-compacting concrete. It has very good flow properties and has been specifically developed to reduce heat generation. As such, large volume repairs may be performed without addition of aggregates.