Polyurethane Spray Foam Insulation System
PENTENS PU-130 is used for thermal and acoustic insulation in:
Packaging
Description
PENTENS PU-130 is a two-component, 1:1 ratio, closed-cell polyurethane foam insulation system which produces a solid foam with exceptional compressive strength when processed through suitable spray machinery (Graco etc). The foam surrounds the structure with a lightweight blanket of insulation that creates a controlled comfort zone inside or outside the structure, contributing to its overall structural integrity.
Uses
PENTENS PU-130 is used for thermal and acoustic insulation in:
- Exterior and interior of agricultural buildings
- Yachts/canal barges
- Internal industrial roofings
- Internal soffit slabs
- Domestic slate or tiled roof
- RC flat roofs
- Internal walls
PENTENS PU-130 is also suitable to be used as a protective layer for waterproofing before backfilling soil at basement wall or pouring concrete at roof decks.
Standard PENTENS PU-130 should not be used on substrates below 50ºC. When used externally, the foam must be protected from ultra-violet radiation and atmospheric degradation by a suitable elastomeric coating, e.g.PENTENS SPU1000.
Standard PENTENS PU-130 should not be used on substrates below 50ºC. When used externally, the foam must be protected from ultra-violet radiation and atmospheric degradation by a suitable elastomeric coating, e.g.PENTENS SPU1000.
Advantages
- Greater structural integrity.
- Multi-purpose for a wide range of building applications.
- Can be trimmed, sanded and sawn, If necessary, it can be painted and plastered as well.
- Can be applied and plastered as well.
- Can be applied to damp surfaces.
- Good adhesion to most construction surfaces, such as wood, brick, concrete, metal and plastic.
Packaging
- In pails (A:B=20:20) - 40 kg / set
- In bulk drums (A:B=200:200) - 400 kg / set
