|
Sika Microcrete 2000 | Dual Shrinkage Compensated, Flowing, Cementitious Repair Material for Formwork Repairs

Share:


Sika Microcrete 2000 | Dual Shrinkage Compensated, Flowing, Cementitious Repair Material for Formwork Repairs

Contact Us


Quantity:


DUAL SHRINKAGE-COMPENSATED, FLOWING, CEMENTITIOUS REPAIR MATERIAL FOR FORMWORK REPAIRS


Description
Sika® Microcrete-2000 is a dual shrinkage-compensated pre-bagged flowing micro concrete. It has very good flow properties and has been specifically developed to reduce heat generation. As such, large volume repairs may be performed without addition of aggregates. With its high silica fume content and combination of blended cement, a highly dense, impervious and hence durable repair mortar is obtained. Sika® Microcrete-2000 contains blended cement, silica fume, fibres, graded aggregates and additives which give rise to controlled expansion in both the plastic and hardened states.


Uses
Sika® Microcrete-2000 is suitable for structural repairs to marine structures, bridges, columns, etc. It is also conducive for use in the following repair works where single placing is in excess of 25 mm thickness:
  • Bridge columns and beams
  • Jetty piles
  • Concrete piling
  • Spillways
  • Dams
  • Grouting applications
Sika® Microcrete-2000 can be applied by gravity pour or mechanical pumping.


Characteristics & Advantages
  • Pre-bagged at the factory / consistent quality
  • Easy to mix and apply
  • Good flow characteristics
  • Suitable for large repairs
  • High ultimate strengths
  • Very dense and durable
  • Non-toxic and non-corrosive
  • Chloride and iron-free
  • Impact and vibration resistant
  • Gaseous expansion system to compensate plastic shrinkage
  • Controlled crystalline expansion system to compensate shrinkage in the hardened state


Colour
  • Concrete grey powder


Packaging
  • 25 kg / bag