|
Sikafloor CureHard 24 | 1-Part Sodium Silicate Clear Surface Hardener, Dust Proofer & Densifier for Concrete
Sikafloor CureHard 24 | 1-Part Sodium Silicate Clear Surface Hardener, Dust Proofer & Densifier for Concrete
Sikafloor CureHard 24 | 1-Part Sodium Silicate Clear Surface Hardener, Dust Proofer & Densifier for Concrete
Sikafloor CureHard 24 | 1-Part Sodium Silicate Clear Surface Hardener, Dust Proofer & Densifier for Concrete

Share:


Sikafloor CureHard 24 | 1-Part Sodium Silicate Clear Surface Hardener, Dust Proofer & Densifier for Concrete

Contact Us

Select variant(s): PACKING
PACKING:

Quantity:


SODIUM SILICATE BASED TRANSPARENT SURFACE HARDENER, DUST PROOFER, SEALING AND CURING COMPOUND FOR CONCRETE


Description

Sikafloor® CureHard-24 is a high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.


Uses

Sikafloor® CureHard-24 may only be used by experienced professionals.
  • Horizontal old or new concrete surfaces, where a hard surface with light to moderate abrasion resistance is required e.g. warehouses, industrial plants, stores, shopping malls, parking structures, service stations, hangars etc.
  • On concrete slabs where no specific curing efficiency or standards are required
  • Suitable for interior or exterior applications
  • Dust-proofing of prefabricated concrete elements
  • Suitable for protection against ingress (Principle 1, method 1.2 of EN 1504-9)
  • Suitable for physical resistance (Principle 5, method 5.2 of EN 1504-9)


Characteristic & Advantages
  • Ready to use
  • Easy to apply
  • Improved chemical and abrasion resistance compared to untreated concrete
  • Reduced dusting of concrete floors
  • Slightly reduces loss of water of new concrete while setting
  • Improves cleanability
  • Non-yellowing
  • Good penetration
  • Solvent free
  • Colourless and odourless


Colour
  • Clear liquid


Packaging
  • 20 litre / pail
  • 200 litre / drum